Archive for the ‘energy savings’ Category

Did anybody say dimming?

Monday, November 3rd, 2008

The Worcester Telegram & Gazette reports that the city council of Fitchburg, Massachusetts plans to eliminate many street lights in an effort to save money. The suggestions so far propose that either one in four street lights be turned off, or the street lights should be turned on at major intersections, and shut off at half of the remaining fixtures. No suggestion related to dimming was allegedly discussed during the meetings.

The benefits of dimming are clear and well-documented. Companies offering solutions in street light management can generate energy savings of 25-40 percent through dimming and more exact burn hours. Such a solution can typically be installed in every pole or simply in the control cabinets, the latter being the most cost-friendly solution. Therefore, dimming would be a great alternative to the suggested solutions in Fitchburg, which in practice would mean that all lights can be left turned on, thus maximizing a high level of safety for the citizens while saving energy and money at the same time.

Singing from the same page

Wednesday, October 22nd, 2008

In a time where a sustainable environment is on top of the agenda, it is crucial that we all have a common understanding of how technology can contribute to a better environment. With street lighting in mind, it is therefore troubling to find that there is still confusion about the benefits of dimming.

In an article brought in The Press on 16 October 2008, the author, a York-resident, expresses his sincere doubts about how dimming can save energy, thus money. He argues that if he turns his dimmer on at home, he will still be charged the same amount as without a dimmer. Several comments follow from different readers trying to explain the correlation between the consumption of kilowatt-hours and dimming, stating that the author is completely wrong.

However, there is some truth in his claim. Provided that he refers to a standard incandescent light bulb with a traditional home-installed dimmer, the savings in his house would be minimal. Such an installation simply cannot be compared to dimmed street lights as these typically use high pressure sodium (HPS) bulbs and a different dimming system. When lowering the voltage on a HPS bulb during off-peak traffic hours for example, the wattage will decrease by 25-40 percent. The point here is, that you cannot compare traditional incandescent light bulbs in your living room with high pressure sodium bulbs used in street lights in terms of dimming.

Non-pollutive streetlight detects earthquakes

Wednesday, October 8th, 2008

Japanese company Sharp is now launching a solar-powered streetlight. Combining Sharp’s own solar modules and long-life, white LEDs, the Japanese company presents the environmentally friendly streetlight solution of the 21st century. The unit delivers brightness at the highest level; still the unit does not produce any light pollution, uses no mercury, and emits no ultraviolet light.

Storage batteries charge from sunlight during the day and shines automatically at night. The level of maintenance is minimal as Sharp’s solution only requires replacement once every 10 years.

One of the extra benefits that especially cities in earthquake zones will enjoy is the built-in seismic motion sensor. This feature enables the unit to detect any earthquake measuring five or higher on the Japanese Seismic Intensity Scale. When detected, the unit will turn on full brightness at nighttime hours for at least two days.

Initially, the solution will be available on the Japanese market. In Europe, the European Union applaudes companies who commit to the reudction of light pollution. Thus, the EU GreenLight Programme has been developed to involve public and private organisations in upgrading their lighting systems to reduce light pollution. Well-known B2C companies such as McDonald’s and Nike have been awarded partner status, while international operating B2B companies such as Amplex A/S and Reverberi Enetec are awarded the endorser status.

Streetlight dimming

Wednesday, August 13th, 2008

The town of Lac Megantic is home to Canada’s largest telescope. However, due to population growth and urban sprawl in the surrounding area, conducting research at the observatory was becoming increasingly difficult.
Therefore, an initiative to reduce the sky glow has led to installation of a number of dimming units in streetlight poles. During the hours of 10 pm and 6 am, the streetlight is reduced by up to 65%, saving as much as 50% energy.
The solution, Night-Saver, is controlled via a microchip and is installed in individual poles. Read more about the project in Canada here…

US cities focus on centralized streetlight control

Thursday, April 17th, 2008

recent article in Washington Post describes how streetlights are a significant source of greenhouse gas emissions. The newspaper quotes Robert Grow, director of government relations at the Greater Washington Board of Trade, for estimating an annual reduction of 1.2 million metric tons of carbon dioxide emissions if the 10 largest metropolitan areas of the US switch to a centralized solution and LED streetlights. This is equivalent to taking 212,000 cars off the roads and save an additional 90 million taxpayer dollars annually.

 

In his report on streetlight savings, Grow recommends a centrally controlled streetlight solution with dimming and optimized maintenance functionalities.

 

According to the Post, Grow was surprised that more hasn’t been done already to improve the efficieincy of streetlight.

 

As previously described in this blog, the most efforts have been made in the town of Ann arbor, Mich. where all streetlights have been converted to LEDs.

 

Centralized streetlight solutions are offered by companies such as US-based Echelon with installations in e.g. Oslo, Norway, and Danish company Amplex with installations in e.g. Scandinavia, the United Arab Emirates and Asia.

 

LED streetlights in North American cities

Friday, January 25th, 2008

In Grand Rapids, Michigan, city officials are experimenting with LEDs for streetlight.

The US company Relume Technologies has provided 12 LEDs for a pilot project which will cut a significant part of the consumption and maintenance bills.

Other North American cities to test LEDs for streetlight are Ann Arbor, Raleigh, N.C. and Toronto, Canada.

See more at the Grand Rapids Press

UK to be world’s leading green nation?

Friday, December 7th, 2007

According to Gordon Brown’s clima speech last week, the UK has plans of creating an environmentally sustainable economy. They have passed a law to fight global warming and want to lead the way by becoming the world’s leading green nation.

According to Brown, the government is currently considering whether the targets for CO2 reductions can be increased from 60 to 80%.

Also, the UK strives to achieve the EU target of having 30% of all energy coming from sustainable energy sources in 2020. Additionally, the financial support for sustainable initiatives will be increased significantly.

In Devon and Cornwall, they have already commenced serious preparations for sustanability by launching a project where all street lights will be dimmable. 40% of the region’s CO2 emmissions stem from lighting, and thus lowering the energy consumption here will provide significant CO2 savings. 

LEDs in American cities

Wednesday, November 14th, 2007

There seems to be a trend towards energy savings being used as branding for American cities. More and more are implementing solutions that lower energy consumption, and then use this in their marketing strategy. Whatever works!
In Yakima, Washington, LEDs are replacing both traffic signal lamps and traditional 200 Watt HPS lamps. Initial results show savings of over 50%. The 100 Watt LEDs provide ultra-white lights with good color rendering. Also, the new lamps lowers light polution and has a 15-year product life. Read the full article on SmartMoney.com.
As described in a previous entry, similar projects are under way, e.g. in Ann Arbor where they are planning on becoming the first American city to convert 100% of their street light to LEDs. See more here…

Iraq: Street lights with solar power

Monday, September 17th, 2007

In the Iraqi town of Fallujah, mostly known for insurgent activity, things have started to quiet down, allowing for an increased focus on rebuilding the infrastructure.

The US Army Corps of Engineers is overseeing efforts to equip the town’s east-west thoroughfare with solar powered street light. With 1,050 lighting points, this will be the biggest solar powered installation worldwide to date, according to the manufacturer, SEPCO.

The system is being installed at the rate of 20 poles per day, and besides Fallujah, 4 other Iraqi towns and 17 villages in Afghanistan have been equipped with solar electric lighting systems.

Read the full article here…

New High Output LED Street Light

Wednesday, August 22nd, 2007

Replacing standard street light with new high output LEDs will save 50% energy and they will last more than 10 years. They are maintenance-free, contain no hazardous material such as gases or mercury, and they are dark sky compliant, meaning that their light is focused on the area where it is needed, and not wasted into the night sky.
At the upcoming American Public Works Association event in San Antonio, September 9-12, these new LEDs will be showcased by the company inventing the new effective street light - IntenCity Ligthing.
The new high output LED uses only 75 watts, but produces 3200 lumens. See more here…